Stainless steel is widely used in families, such as kitchen stoves, microwave ovens, gas cooker, electronic parts, cabinet tops, kitchen hardware, etc. With laser cutting equipment, stainless steel can be cut, planed, cut and perforated.
Stainless steel pot and tableware are high temperature resistant and easy to clean. The integrity is good and the color value is high.
Stainless steel parts and hardware are of high hardness, high accuracy, wear resistance and easy to clean up.
The stainless steel mesa is all in one, there is no sanitary corner, wear-resistant and dirty. Now the whole stainless steel cabinet has also become the choice of many families.
There are gas cooker, gas stove, oven microwave oven, use a lot of stainless steel electronic components, high precision, corrosion resistance, help these kitchen equipment to better play the function, and have longer service life.
It can be seen that the application of stainless steel is extensive, and all kinds of stainless steel processing is also very important. The common stainless steel cutting methods include high pressure water jet, water cutting, water cutting, stepping blanking, guillotine shears, disc shears, grinding wheels cutting, laser cutting and so on. Among them, stainless steel sheet laser cutting machine occupies a large proportion in industrial production.
Laser cutting is used to melt and vaporize the stainless steel when the laser beam is irradiated to the surface of the steel plate. The CO2 laser cutting machine or the fiber laser cutting machine is generally used, with a power of 500~2500 watts. The power level is lower than that of many household electric heating appliances.
However, through lens and reflector, the laser beam is concentrated in a very small area. The high concentration of energy enables rapid local heating and evaporation of stainless steel. Because the energy is very concentrated, only a small amount of heat is transferred to other parts of the steel, resulting in little deformation or no deformation.
Laser can cut the complex shape billet accurately and accurately, so the blank must be further processed.
The stainless steel under 4mm can be cut by laser cutting equipment and 8 ~ 10mm thick stainless steel can be cut by oxygen in the laser beam, but a thin oxide film will be formed on the cutting surface after the cutting of oxygen. The maximum thickness of cutting can be increased to 16mm, but the size error of cutting parts is larger.
Optical fiber laser cutting machine machining metal sheet
The price of laser cutting equipment is high, but it reduces the cost of subsequent process. At the same time, there is no tool cutting cost for laser cutting machine.
Therefore, the laser cutting machine is a good choice for both large production and small batch production. The laser cutting machine has a significant advantage for some of the different sizes and special parts that can not be processed.
At present, the laser cutting equipment usually uses the computerized digital control technology (CNC) device. After using the device, the cutting data can be accepted by the telephone line from the computer aided design (CAD) workstation.