GEM LASER LIMITED
search
  • Home
  • Laser Products
  • Application
  • About GEM
  • Services
  • Resources
  • News
  • Contact

GEM-UV-003 UV Laser Marking Machine

GEM-UV-003 UV Laser Marking Machine
Similar products
GEM-UV-003 UV laser marking machine output 355nm UV light, focusing spot is very small, and the heat affected area is minimal, which is mainly used for ultra-fine marking, special materials marking and carving.

UV Laser Marking Machine GEM-UV-003 Specifications

Item

Model

GEM-UV-003

1

Laser wavelength

355nm

2

Laser power

3W@30KHz

3

Repeat frequency

10-150KHz(max200KMz)

4

Marking range

80mm×80mm

5

Marking line width

≤0.015mm

6

Marking depth

≤0.01mm

7

Minimum character

0.06mm

8

Marking line speed

9000mm/s

9

Repeat accuracy

±0.01mm

10

Power Supply

220V/ Single-phase/50Hz/60Hz/16A

11

Whole power

1.5KW



UV Laser Marking Machine GEM-UV-003 Dimensions

845 mm ×850m ×1600 mm

UV Laser Marking Machine GEM-UV-003 System Features;
A widely applications, make up for the lack of infrared laser processing capacity;
B. good light beam, small focus spot, available for ultra-fine marking;
C. small heat affected, avoid machining material damage, high yield;
D. high speed tagging, high efficiency and high accuracy;
E. non-wear parts, low cost and low maintenance cost;
F. stable and can run for a long time

UV Laser Marking Machine GEM-UV-003 Work environment requirements
1) environmental temperature requirements between 15-35 degrees, requiring air conditioning;
2) humidity requirement is <60%. No condensation should be installed dehumidifier;
3) power grid requirements: 220V; 50Hz/60Hz;
4) power grid fluctuation: + 15%, the power grid ground line in line with international requirements. If the voltage amplitude is more than 15%, electronic automatic voltage regulation and steady flow device shall be installed;
5) there should be no strong electromagnetic interference in the vicinity of the installation equipment. Avoid radio transmitter stations (or relay stations) around the installation site;
6) ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid a large number of stamping and other machine tools in the vicinity;
7) space requirements to ensure that no smoke, dust, metal, polishing, grinding and other dust, a serious working environment;
8) air pressure: 86-106kpa;
9) someplace should be equipped with anti-static floor, strengthen shielding and so on;
10) the water quality of working cooling circulating water has strict requirements, requiring the use of pure water, deionized water or distilled water, not using tap water, mineral water and other liquids containing higher metal ions or other minerals.

UV Laser Marking Machine GEM-UV-003 Device configuration list(Standard)


Products name

Parts name

Specifications&Model

Origin

Optical system

Laser

Pulse-355-003 laser

China

Beam expander

10X

China

Galvanometer

SCANLBA/仿SCANLBA

Germany/China

focusing lenses

f-θ100

China

Control System


Main control box

Pulse-355-003-DY

China

Computer

IPC58

China

Display

LCD

China

Marking control card

USB Digital card

GEM

Marking software

GEM-MS001

GEM

Cooling System

Cooling Machine

1000W

China

Focusing system

Workbench

Manual lift

China



UV Laser Marking Machine GEM-UV-003 Applications

It’s widely used in special materials marking, cutting and processing, such as all kinds of glass, LCD panel, textiles, chip ceramics, semiconductor wafers, IC grains, sapphires, polymer films, etc.
Sample of GEM-UV-003 UV Laser Marking Machine
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86-27-84793136
  • EMAIL:sales@gem-lasers.com
  • ADDRESS:No.442, Wuluo Road, South Central International City A2 Block, Wuhan City, Hubei Province, China